Assignment: Mitigation Plan Discussion

Assignment: Mitigation Plan Discussion
Assignment: Mitigation Plan Discussion
Assignment: Mitigation Plan Discussion
Week 6 Suppliers, Inputs, Process, Outputs, and Customers (SIPOC) Mitigation Plan In your informatics process improvement project, the SIPOC tool will summarize the inputs and outputs of one or more processes in table form. Specifically, the SIPOC identifies project risks and creates a mitigation plan for your identified informatics project. Instructions Create a Suppliers, Inputs, Process, Outputs, and Customers (SIPOC) Mitigation Plan. The acronym SIPOC forms the columns of the table. Incorporate three of the Learning Health Systems (LHS) core values into the Process, Outputs, and Customer column. The LHS core values are described in your week 6 required resources. Download the SIPOC Template at:
Risk Mitigation Planning (it used to be called ) is the process that identifies, evaluates, selects, and implements options in order to set risk at acceptable levels given program constraints and objectives. This includes the specifics on what should be done, when it should be accomplished, who is responsible, and associated cost and schedule. The most appropriate strategy is selected from these mitigation options: [1, 2]
Risk Avoidance
Rick Controlling
Risk Transfer/Sharing
Risk Assumption
For each risk the type of mitigation strategy must be determined and the details of the mitigation described in the . The intent of risk mitigation plan is to ensure successful risk mitigation occurs.
Risk mitigation planning is the activity that identifies, evaluates, and selects options to set risk at acceptable levels given program constraints and objectives. Risk mitigation planning is intended to enable program success. It includes the specifics of what should be done, when it should be accomplished, who is responsible, and the funding required to implement the risk mitigation plan. The most appropriate program approach is selected from the mitigation options listed above and documented in a risk mitigation plan. [1]
The level of detail depends on the program life-cycle phase and the nature of the need to be addressed. However, there must be enough detail to allow a general estimate of the effort required and technological capabilities needed based on system complexity. [1]
Risk Avoidance
Is when it’s decided to perform other activities that don’t carry the identified risk by eliminating the root cause and/or consequence. It seeks to reconfigure the project such that the risk in question disappears or is reduced to an acceptable value.
Risk Controlling
Is when you control the risk by managing the cause and/or consequence. Risk control can take the form of installing data-gathering or early warning systems that provide information to assess more accurately the impact, likelihood, or timing of a risk. If warning of a risk can be obtained early enough to take action against it, then information gathering may be preferable to more tangible and possibly more expensive actions.